A GEX chart shows, strike by strike, how much stock dealers would have to trade to stay hedged if price moved 1%, under an assumption about who holds which options. To read one, check how fresh the data is and which expirations it covers, then find price against the flip, the largest node and the walls, and watch how they change. This guide walks through that routine, using GEXTWEAK as the worked example.
What a GEX chart shows
Most GEX charts are a ladder. Each row is one strike price, and the value on the row is the strike's gamma exposure: the estimated dollar amount of the underlying that dealers would buy or sell to rebalance their hedge for a 1% move. If the term is new, start with the guide to gamma exposure, which covers delta, gamma and the formula.
On GEXTWEAK a ladder of strikes is called a board. Each board row is one strike, and the value is net GEX in dollars per 1% move in the underlying, which can also be shown as a percent of the King or both. GEXTWEAK computes it per strike as gamma x open interest x 100 x spot squared x 0.01, with gamma recomputed by Black-Scholes from the chain's implied volatility, smoothed where quotes look unreliable.
The sign matters more than the size at first. A positive row means calls outweigh puts at that strike once each is counted with its conventional sign; a negative row means puts outweigh calls. That sign rests on a convention: dealers are assumed long the calls and short the puts.
Step 1: check the time and the expirations
Before reading any level, check two dates. The first is when the numbers were calculated. The second is when the open interest was counted, because open interest is published once a day and does not change during the session.
On GEXTWEAK the board footer reads "as of" followed by the data time in Central time, and a separate line reads "OI as of" followed by the date of the close that open interest comes from.
Then check which expirations the chart sums. A chart built on one expiration and a chart built on several can show different largest strikes for the same ticker. A GEXTWEAK board shows one expiration by default: the nearest one that has not yet settled. A same-day expiration stays on the board until it settles, then the next expiration takes its place. Boards do not offer a separate 0DTE, weekly or monthly view; when one of those is picked, the board says it is not available and shows the front expiry. For what changes on the last day of an option's life, see the guide to 0DTE options.
Step 2: find price against the flip
The flip is the price where modeled net dealer gamma changes sign. In a typical profile, with puts concentrated below and calls above, hedging tends to lean against moves above it and to go with them below it. The guide to the gamma flip explains the two common ways to compute it and why they disagree.
Note which side of the flip price sits on and how far away it is: near the flip, a small move can change the regime.
On GEXTWEAK the boards and the chart's flip line use the running total method: net GEX is added strike by strike from the lowest strike up, and the flip is where that total crosses zero, nearest to spot. The flip line on the chart is off by default and is switched on in Settings. Members see the level labeled "CUM FLIP" with its price and how far above or below spot it sits, in percent. When the running total never crosses zero, there is no flip and no line is drawn.
Step 3: find the largest node
A node is a strike with a large value on the ladder. The largest one, by size and regardless of sign, is where the biggest hedge adjustment is modeled to sit.
GEXTWEAK calls this strike the King. On a board it is the strike whose net exposure is biggest in size, whether positive or negative, for that board's expiration; the search covers strikes within 35% of spot, not only the rows on screen. On the chart, the King gets its own tag on the price axis, marking the board's current King.
Step 4: mark the walls
Walls are the strikes with the biggest call and put positions. The guide to the call wall and put wall explains why the call wall often acts as a ceiling and why the put wall is a less reliable floor.
On GEXTWEAK the call wall is the strike with the largest positive net GEX and the put wall the strike with the most negative net GEX. Neither is defined by being above or below price. The chart's walls are computed on its default view of six expirations, so they can differ from the walls you would pick off a one-expiration board.
Step 5: watch what changes through the session
Because open interest is fixed for the day, intraday changes in a GEX chart come from price, implied volatility and time moving the gamma of the same positions.
GEXTWEAK shows the history on the chart as orbs. Each orb is one strike at one 5-minute checkpoint, sized by its share of the day's King. By default (the "Best" setting) the chart shows the King plus nodes at 25% or more of it, at most 8 per checkpoint. The overall sign is shown as a POSITIVE or NEGATIVE gamma chip on the chart, decided only by the sign of net GEX summed over strikes within 35% of spot. It is a separate read from the flip, so the chip and the flip can point to different regimes. During market hours the board is recalculated at most once a minute and the screen checks for new numbers every 60 seconds.
Step 6: compare the indexes
SPX and SPY follow the same index through different contracts, and QQQ follows a different index, so their exposure can disagree. When the three ladders tell the same story, for example price above the flip on all three with large positive nodes near price, the read is more consistent.
GEXTWEAK docks SPX, SPY and QQQ boards beside the chart so they can be read side by side. Strike prices differ between the three, so compare where price sits against each board's own flip and King, not the raw strike numbers.
Limits
Every GEX chart is an estimate. Dealer positioning is assumed from a sign convention, not observed: open interest says how many contracts exist, not who is long them. The convention fits index options better than single stocks and is weakest for same-day options, where customers buy and sell both sides. Open interest updates once a day, so positions opened and closed within the session are missing. Dealer hedging is one flow among many, and news, macro data or a large order can swamp it. The levels move as positions, volatility and time change. This guide explains how to read the map; it is educational and not trading advice.
On GEXTWEAK
The Free plan opens SPY, plus the /ES and /NQ futures charts, with no boards. Retail opens a set list of ten tickers and GEX boards with one expiration in the Focus view. Whale opens any ticker and adds VEX and CHEX boards, covered in the guide to vanna and charm. The orbs, the King, the flip line and the boards are part of Argus.